Aluminum Products
• Volume density ≥ 1.70g/cm³
• Excellent oxidation resistance, resistant to aluminum liquid erosion
• Service life is three times that of ordinary products
PRODUCT
Showing all 11 results
-
-
Carbon Electrode
• Volume density: ≥ 1.45 g/cm³
• Resistivity: ≤ 55 μΩ·m
• Compressive strength: ≥ 22 MPa
• Ash content: ≤ 8%
• Thermal expansion coefficient: Low, resistant to thermal shock -
Graphite Accessories
• Bulk density ≥ 1.75 g/cm³
• Resistivity ≤ 12 μΩ·m
• Compressive strength ≥ 45 MPa -
Graphite Mould
• Density ≥ 1.82 g/cm³
• Coefficient of thermal expansion ≤ 3.0 × 10⁻⁶/℃
• Bending strength ≥ 32 MPa -
Heat Preservation Series and Carbon Materials
• Thermal conductivity ≤ 0.25 W/(m·K)
• Maximum operating temperature 2800℃
• Low ash content
• Good thermal stability -
HP Graphite Electrode
• High resistance to oxidation and thermal shock.
• High mechanical strength, low electrical resistance.
• High machining accuracy, good surface finishing.
• Withstand large currents, high discharge rate.
• Good dimension stability, not easy to deform.
• Resistant to cracking & spalling
-
Lithium Battery Industry
• Purity ≥ 99.9%,
• bulk density ≥ 1.72g/cm³,
• resistant to acids and alkalis,
• good thermal shock performance
-
Precious Metals Industry
• Purity ≥ 99.95%
• Volume density ≥ 1.80g/cm³
• Excellent thermal shock stability
• Not prone to leakage
-
RP Graphite Electrode
• High resistance to oxidation and thermal shock.
• High mechanical strength, low electrical resistance.
• High machining accuracy, good surface finishing.
• Withstand large currents, high discharge rate.
• Good dimension stability, not easy to deform.
• Resistant to cracking & spalling -
UHP GRAPHITE ELECTRODE
• High resistance to oxidation and thermal shock.
• High mechanical strength, low electrical resistance.
• High machining accuracy, good surface finishing.
• Withstand large currents, high discharge rate.
• Good dimension stability, not easy to deform.
• Resistant to cracking & spalling
-
Vacuum Equipment Furnace Parts
• Ash content ≤ 0.05%,
• maximum operating temperature 2200℃,
• low resistivity,
• does not deform easily at high temperatures